carpet extracter::Floor finish cleaning: always sweep or dust mop the floor before cleaning carpet extracter

carpet extracter

carpet extracter

carpet extracter::Floor finish cleaning: always sweep or dust mop the floor before cleaning.
Always use a neutral cleaner to clean floor finish.
A nonneutral cleaner may dull and even strip the floor finish from the floor.
You need a mop bucket with ringer, a mop handle and mop head.
If you happen to use the mop bucket for stripping you must thoroughly clean the bucket of all stripper residue.
Do not use a mop that was used for stripping to clean a floor.
If you have a large area such as a supermarket to clean you should use a auto scrubber which will make your cleaning a lot easier.
Spray buffing consists of a spray buff chemical, a floor buffer of 175 rpm or 300 rpm and a floor pad made for buffing.
To spray buff your lightly mist the spray buff in front of the buffer and you buff that area until the spray buff is worked into the floor and a shine appears.
Mop on restoring uses a similar chemical to the buffing chemical but it is applied by mixing the solution in a bucket with water and mopping the solution onto the floor.
You let the floor dry and use a high speed burnisher of 1500 rpm or more with a burnishing pad to shine the floor.
Their are also pastes that can be used with burnishers that you place a ribbon of the chemicals in front of a burnisher and walk the burnisher up and down the area that needs to be shined.
household carpet cleaner::A spray extraction cleaner for cleaning of
carpets and upholstered furniture household carpet cleaner