how to lay carpet in a boat::Installing boat carpet is one of those projects that can easily be accomplished with the right tools and a little direction how to lay carpet in a boat

how to lay carpet in a boat::Installing boat carpet is one of those projects that can easily be accomplished with the right tools and a little direction.
Start by gathering up the tools you will need.
Utility knife and lots of blades 2.
Screw drivers including a philips and a straight 4.
Disposable paint brushes 11.
Now have a look at the carpet and notice the grain on the rubber backing.
Now lets get busy.
Start by removing all the hardware, storage lids, compartments, or any other pieces that have to be removed from the boat 2.
Remove the old carpet 3.
Start scraping the old marine glue off.
Begin taking your measurements and start marking the direction of lids or compartments that will also be covered with carpeting.
Leave yourself a little extra when taking your measurements.
Start in one section and work your way around the boat 7.
Apply the glue with a trowel and make sure to apply lots.
Lay the carpet on the glue and adjust to fit properly.
Leave the excess overhang for now.
You can return and trim later.
Use your phillips screwdriver to run along the edge and mark where the cut will be.
Once you have the complete floor carpeted you can return and begin to do your trimming.
Remember to watch the direction of the grain and to leave yourself adequate carpet to wrap.
Apply glue to lids and then apply carpet wrapping over the edge.
Apply continuous pressure rubbing back and forth to ensure the adhesive bonds.
Once the glue has set up you can begin trimming the compartments and lids also.
Reapply all hardware that you removed.
Just a couple of tips that can make your project go even smoother.
Let the carpet warm in the sun for a short period.
This removes wrinkles and softens the backing making it more pliable and easier to work with.
Always allow yourself extra when doing your measurements.
Use only approved marine glue.
Other glues may dry too quickly or may let loose when exposed to water.
Always use glue in a well ventilated area.
how to lay carpet in a boat::Each and every type of water vessel
including family rowboats, speedboats, yachts, catamarans, kayaks,
fishing trawlers, luxury liners, aircraft carriers, , and even sized
ships require boat carpets to be installed on board how to lay carpet
in a boat